How to Fix BSOD 0x0000000C MAXIMUM_WAIT_OBJECTS_EXCEEDED Error

Monday, 28 September 2020

How to Fix BSOD 0x0000000C MAXIMUM_WAIT_OBJECTS_EXCEEDED Error

Posted by Madhu Gupta

This article is meant to help you fix the BSOD 0x0000000C MAXIMUM_WAIT_OBJECTS_EXCEEDED Error. 

This error appears on your blue screen. The operating system in your PC has built-in wait blocks that allow the system to simultaneously wait on multiple objects. If the OBJECTS are more than the WAIT blocks. The blue screen of death will display this error.

Your computer will often flash this error message before restarting. Even though it's not a common BSOD error, it is an error that occurs on Windows operating systems.


To solve the MAXIMUM_WAIT_OBJECTS_EXCEEDED error with value code 0x0000000C, here is what you should know:

  1. Symptoms of The Error MAXIMUM_WAIT_OBJECTS_EXCEEDED (Error Code 0x0000000C) 
  2. Reasons For The Error MAXIMUM_WAIT_OBJECTS_EXCEEDED (Error Code 0x0000000C) 
  3. The solutions to Fix The Error MAXIMUM_WAIT_OBJECTS_EXCEEDED (Error Code 0x0000000C) 

BSOD 0x0000000C MAXIMUM_WAIT_OBJECTS_EXCEEDED Error


Part 1: Symptoms Of The 0x0000000C MAXIMUM_WAIT_OBJECTS_EXCEEDED Error


There are moments when your computer will be slow while booting. While in other times, the computer will restart itself and start flashing this error message. When hardware fails, BSOD errors are bound to happen instantly. In most cases, when the 0x0000000C is due to a software issue, the computer will boot but only for a few minutes. 


Installing new drives or software that is incompatible with the existing system, the communication system falls apart, and hence the system collapses.


Too many writing and reading errors when installing new programs or copying indicate an imminent BSOD error. 


Part 2: Reasons For 0x0000000C MAXIMUM_WAIT_OBJECTS_EXCEEDED Error


Here are the possible causes of the error code 0x0000000C. 

a) Improper Connections 

This takes you off the belief that the hard drive is the leading cause of this error. Wrong cable connections and connecting peripherals to wrong slots can lead to this issue. Ensure every connection on the PC is made correctly at all times to avoid BSOD errors.  


b) Corrupted Hard Drive And Outdated Drives


A hard drive can become faulty due to virus attack, aging, power surges, and dropping the PC. A bad hard drive causes misconfiguration of system data and is the primary cause of BSOD errors. Updated a Windows OS with old drives causes conflict with new drives hence causing 0x0000000C MAXIMUM_WAIT_OBJECTS_EXCEEDED error. By the way, to recover lost data for the corrupted hard drive, try the solutions of Wondershare Recoverit.


c) Computer Virus


Virus attack on computer systems is another cause of this issue. The virus causes malware to the system by affecting files and folders that are critical for the system to function normally. 


Part 3: The Solutions To Fix The Error MAXIMUM_WAIT_OBJECTS_EXCEEDED (Error Code 0x0000000C) 


Knowing the various causes of this error will, to a small extent, help you resolve BSOD errors quit easily. Whereas the internet never falls of suggested solutions, it's critically important to learn how to troubleshoot and fix computer errors when they occur. 

Solution 1: Start Your Computer In Safe Mode

If this error occurred while loading Windows, it's likely that someone blocked the system from working. And now that you cannot access the system try interrupting the process by pressing F8. Once the system is open, choose Settings on the Start menu to open the Update & Security page.


  • Next, click on the Recovery option>> Advanced startup and then tap Restart now.
  • When asked to choose the next step, select Troubleshoot and the Advanced options. 
  • This will now direct you to the Startup Settings
  • Choose Enable Safe Mode, and lastly, press Restart or F4.  

If this did not solve your problem, try this no. 2.


Solution 2: Update Drives Using The Device Manager 


Installing new hardware, USB device, or installing device drivers from unrecognized sites other than Microsoft can make this error occur.


Follow these steps to fix the 0x0000000C MAXIMUM_WAIT_OBJECTS_EXCEEDED error.


  • On the keyboard, press the Windows button and then type the device manager. 
  • Select Device Manager, and since you know all your newly installed drive devices, click to mark them.
  • After right-clicking the device name, tap Update Driver Software. 
  • Clicking the Update Driver Software will open up two options:

      1. Search automatically for updated driver software
      1. Browse my computer for driver software 

Both options are applicable, but to help identify the driver devices faster, select (no. ii). 



Solution 3: Scan Your Computer  


Since your computer system may be infected by a virus, using an antivirus to scan it will fix this problem and other computer problems.  


Luckily, there are many free and paid antivirus programs available for download with just a single click. You should scan the entire computer system- hard disks and RAM.


Solution 4: Use Windows Compatibility Mode To Align Older Versions 


Did this error occur after launching a program on your computer? Then, outdated computer software and other programs could because of the "MAXIMUM_WAIT_OBJECTS_EXCEEDED" error appearing on that blue screen of death. 


This is how to fix compatibility issues.


Step #1 Search for any executable program file (.exe extension) and then right-click to open the drop-down menu with Troubleshoot compatibility and other options. 



Step #2
Select Troubleshoot compatibility, and another window will open up. On the new 
Program Compatibility Troubleshooter window are two options:

  • Troubleshoot program, and
  • Try recommended settings. 


Weigh each option to determine which fits your circumstances. In the first option, the computer will troubleshoot based on the problems encountered while second works according to the recommended settings.

Solution 5: Uninstall Any Recently Installed Software And Drives

It may surprise you that the software you installed thinking it would help is the cause of the BSOD error preventing you from accessing the computer. You can also have downloaded files or programs unknowingly, which are causing the problems with your PC.


  • To uninstall, type Control Panel in the search box and tap to open. 
  • On opening, you'll find Uninstall a program.
  • Select Programs and Features to open the list of installed files and programs.
  • Click Uninstall and follow all the prompts to uninstall any current programs successfully.
  • Lastly, reboot to see if the 0x0000000C MAXIMUM_WAIT_OBJECTS_EXCEEDED error is fixed. 

Besides, you can also try the advanced method to fix this blue screen error.


Conclusion


If you've been looking for solutions to fix BSOD "0x0000000C MAXIMUM_WAIT_OBJECTS_EXCEEDED" Error, it's my belief you've already fixed it. There are over a hundred other BSOD errors that can occur on your computer. Most of the solutions above will help resolve them.

0 comments:

Post a comment