How to Fix PXE-E53 No Boot Filename Received Error

Did your computer stop working and show the PXE-E53 No Boot Filename Received Error? This occurs when the computer can’t find any boot device and uses the PXE server. But it is hard to pinpoint the main reason as several types of issues can make this error arise. Here are some ways to fix PXE-E53 No Boot Filename Received Error.

To fix PXE-E53 No Boot Filename Received Error, you can try PCKeeper, which always solves every problem. Besides this, you can check your hard drive, boot settings, and motherboard for dust. Sometimes, this dust can force an error. Also, check all the connections between the hard drive and the motherboard.

Try the following ways to fix the error.

Why am I seeing PXE-E53, No Boot Filename Received Error?

You can answer quickly if you are an expert in technical skills. The reason is simple. Your PC or Laptop could not find any boot device, so it started showing this error no boot filename received. As there was no boot device, it stuck with the last option, the PXE server, as you are not using it.

How to Fix PXE-E53 No Boot Filename Received Error

How To Fix PXE-E53 No Boot Filename Received Error

As I said, I need to determine the main reason for this error. We will have to check all the possible issues one by one that can cause this problem to occur. And don’t think your hard drive is crashed and your whole data will be lost. There can be dust on your hard drive which can force this error to occur.

See also : How to Fix BSOD 0x0000000C MAXIMUM_WAIT_OBJECTS_EXCEEDED Error

PCKeeper (An All In One Solution)

PCKeeper is considered one of the best, most efficient & in one solution to every Windows problem. This issue and almost all Windows errors can be fixed using it. Follow the step-by-step guide mentioned below:

  1. Download PCKeeper from here. (Click on “Clean Your PC” to download it).
  2. Install it on your system.
  3. Now, follow the instructions given on the screen.
  4. Check Your Hard Drive<

PCKeeper

You can usually find the solution to this error on your hard drive only. Sometimes due to dust, your hard drive stops working, then your computer doesn’t get any boot device. Due to it, the monitor shows this error.

First, open your CPU and check whether your hard drive is working or dead. If it’s finished, sorry to say, but this was the problem. If it’s not over, remove your hard drive and connect it to another computer, and if it’s showing a hard drive in that computer, there should be dust in it. Remove all the dust and start the diagnosis test. If it is successful, your data is not lost; it’s safe.

Check this out : Fix Windows 10 Installation Error 0x80070070

Check Boot Settings

Sometimes your boot drive option can be changed. Go to your boot menu by pressing F1 or F8, or ESC depending on your manufacturer, and then check whether your first boot device is a hard drive.

Boot settings

If it’s not, then change the order. Remember first boot device is the hard drive. Say the first boot is now a CD drive, then change it to a hard disk; otherwise, you will need a disk in your CD drive to take the boot from the CD drive.

Check this out : 7 Best Free USB Bootable Software for Windows

Check All Connections

If there is any loose connection, fix it tightly; otherwise, your hardware devices will not work correctly. Check all the connections between your hard drive and motherboard and ensure there is no short circuit. It is recommended to check all the connections by using new cables.

See also : 9 Solutions to Fix Windows Explorer has Stopped Working Error

Look For Dust

Please search for a blower and clean the dust wherever you see it, such as the motherboard, hard drive, etc.

Check Mother Board

Your motherboard should be fine if something works from all the tips mentioned earlier. Clean dust from your motherboard and check all the cable connections properly. This will work for you.

FAQs

What is no boot filename received in Ubuntu PXE-E53?

The PXE-E53 error means that the PXE client has received at least one valid DHCP/BOOTP OFFER, but the client doesn't have a boot filename to download. Sometimes the DHCP and PXE servers are on the same server, but one was moved to a different server. This can also be a cause of receiving this error.

What does no boot filename received mean?

This means your device is not able to find any kind of bootable device. It couldn't find any device, so it tried the PXE Server. But as you don't use this server, the device failed to boot from it, and the error occurred.

How do I enable PXE boot?

Select the option Deploy this boot image from the PXE-enabled distribution point from the Data Source in the boot image properties.

Summing Up

So this is it. There is no specific reason for this error, but it occurs when no boot device is found, so it had to use the PXE server. Sometimes it is also because of the dust that clogged the device. Try these tricks and see if they work.

Scroll to Top